Mosaic Damascus integral 210mm

2024

 

This Knife, based on the Japanese Gyuto, is a great allrounder in the kitchen. With its 210mm edgelength it is large enough for serious work, but not unwieldy and still perfectly suitable for fine work due to the thin tip.

   

The eyecatcher of this knife is the forged-to-shape mosaic damascus steel, which flows beautifully from the bolster into the blade.

​

The handle is made from a single piece of dyed stabilized poplar burl of which the grain perfectly matches the bold damascus pattern. The combination of clean facets and flowing curves make this handle both comfortable in use and beautiful to look at.  

​

​For excellent cutting performance, this knife has an S-grind (convex grind with a hollow in the side of the bevels) into a thin edge and tip. The balance point is at the front edge of the bolster.

​The thin grind on the knife does mean, however, that the knife is not suitable for heavy chopping into bones, joints etc. Furthermore, the carbon steel requires a bit of extra maintenance to prevent rusting.

​​

Blade: O2, O1 and 75Ni8 Mosaic damascus, carbon steel, hardened to 60±1HRC, etched for contrast and depth
Handle: Dyed Stablized Amboyna burl, Contoured with crisp facets and a heriloom fit into an integral bolster. 

Grind: S-grind, thin edge, distal taper into thin tip

​​

Total length: 33.6cm
Edge length: 21cm
Blade height: 4,8 cm
Spine thickness: 4mm at the bolster, 0.6mm at 2cm in front of the tip
Thickness above the edge: 0.15 mm
Overall weight: 209g

 

​​For more info and to purchase this Knife, please use the contact form with the ordernumber 2024-03